Bmr-suspension SP054 User Manual download pdf

LOWERING SPRINGS FOR 2010-PRESENT CAMARO

Part #’s SP019, SP020, SP021, SP022, SP023, SP024, SP025, SP052, SP053, SP054

Required Tools:

Hydraulic jack and jack stands

Spring compressor (optional)

Wrenches: 7mm, 10mm, 15mm, 18mm, 24mm

Sockets: 15mm, 18mm, 24mm

Front Installation:

1. Lift vehicle and safely support it on stands. Remove

the wheel and tire assemblies.

2. Locate the ABS line where it attaches to the strut.

Slide the line out of the bracket as illustrated in

IMAGE 1.

3. Using a 10mm wrench or socket, remove the brake

line retainer bolt where it attaches to the strut. See

IMAGE 2 for reference.

4. Un-bolt the sway bar end link from the strut using a

15mm wrench on the nut with a 7mm wrench in the

center to hold the shaft. See IMAGE 3 for reference.

5. Using a permanent market, grease pencil, or paint pen

mark the strut and spindle along their mating surface.

This mark will be used later during reassembly.

6. Using a 24mm wrench and socket, remove the (2)

large bolts that retain the strut to the spindle. See

IMAGE 3 for reference.

1 2 3 4 5 6

Page 1

LOWERING SPRINGS FOR 2010-PRESENT CAMARO Part #’s SP019, SP020, SP021, SP022, SP023, SP024, SP025, SP052, SP053, SP054 Required Tools: Hydraulic

Page 2

LOWERING SPRINGS FOR 2010-PRESENT CAMARO (Cont.) 7. Open the hood and unscrew the plastic caps on top of the strut retainer nuts. 8. Remove

Page 3

LOWERING SPRINGS FOR 2010-PRESENT CAMARO (Cont.) 14. Bolt the strut assembly to the spindle and snug the bolts. Line up the strut and spindle t

Page 4

LOWERING SPRINGS FOR 2010-PRESENT CAMARO (Cont.) 3. Using a 21mm socket and 21mm wrench, remove the lower shock bolt located on the lower co

Page 5

LOWERING SPRINGS FOR 2010-PRESENT CAMARO (Cont.) 7. Pivot the lower control arm down out of the way and remove the shock and spring assembly as

Page 6

LOWERING SPRINGS FOR 2010-PRESENT CAMARO (Cont.) 17. Re-indexing the rear suspension bushings – with the suspension loaded and vehicle at ride he

No comments

Bmr-suspension SP054 User Manual